Nonax 46
Tumblebug by Frank Chambers
Description:Hold TUMBLEBUG between the thumb and second finger at the point marked "A" on Fig 1, with the base resting on a firm, level, flat surface (not too slippery).Note that point A is not vertical but is slightly overbalanced toward the left. (the illustration assumes that you are right-handed).Now release TUMBLEBUG (no pushing!).If you have not solved the puzzle, it will rock down on its convex side and settle in the position shown in Fig 2.However, if you have correctly solved the puzzle...
€100.00
0 bids
TonDel 15
My own BLACK! WHITE! puzzle (c) Ton Delsing
12 pieces with inlaid letters. Pieces with tongue and groove. All pieces 20x20 mmSlide from the starting position ALBWHITE CK!!ET TO !WHITE !BLACK! On the back there is a slide up and down. This slide changes the free hole.Then slide to BLACK! WHITE! easy?Material Acrylic.
€53.00
Canuck 387
Mastermind by Tamas Vanyo
I’m offering up this neat sliding tile puzzle/game.Here’s a description from Tamas:“It has a frame included 15 pieces (with symbols) that cannot removed just slipping in it. It has 4 success pieces that can be remove (and can variable from its two side).The rules are:1. Put success pieces into right frame (the four black is always on bottom).2. Rearrange symbol pieces to fit success pieces rules.There are many solutions.”Shipping cost to be determined at close of auction.
$20.00
0 bids
Stevepick 10
Piano Box, Mowens
This is the sequential movement leading to sequential discovery, designed by Alex Owens. 3D printed in black and white PLA, keys and sides have a great gloss/ ebony grain finish.I've spent a lot of time refining this so that everything slides effortlessly while keeping the tolerances nice and tight.
£50.00
1 bid
-500x500.png)
Stevepick 10
Rainbow box V2 scaled down to 75%by Mowens
(Listing is for the smaller blue box only, white box for size comparison) It's back, your favourite Rainbow puzzle by Alex Owens.The general comments on this box usually go like this, we love the box but it's too large for the display cabinet, I hear you, and that's why I've scaled the puzzle down by 25%, it's now dialed in just right, tolerances are right so that it feels solid, yet all the parts still move just as flawlessly as the original full sized box. This revision has been approved by ...
£70.00
1 bid
Aurelo83 64
Dovetail Bar 1 & 2 by Richard Williams
car. "Dovetail Bar" designed by Richard Williams and cartLot of 2 puzzles : Dovetail Bar 1 and Dovetail Bar 2 designed by Richard Williams and produced by P91 Puzzles. Goal: Separate the dovetail. Ship from France with tracking : (estimate) Europe (USA, Canada, Australia…) : 33,50€In Europe (Germany, Spain…) : 14,85€United Kingdom : 17,85€In France : 6,65€Payment : Wise or Paypal (F&F)
€65.00
0 bids
Kwaszak 255
DuoElevator
Designed by Lucie Pauwels and crafted by Nothing Yet Designs.Goal: Place the ball in one of the holes. Using the panels, gravity, and senses; navigate the ball to the other hole to exit.Perfect Condition. Comes from a smoke free home and properly stored.Will package with a collector in mind for shipping.*Buyer pays shipping costs and will be added at end of auction. I accept Friends and Family and Goods and Services payments. I understand the importance of G&S with buyer protection and some buye...
$20.00
0 bids
Stevepick 10
Heart Box, Mowens
This is the full heart box by Alex Owens, it's printed in marble PLA (white stone and brick) to give it a unique finish, sequential movement leading to sequential discovery, 2 finds, 2 compartments. I've refined this to look and feel excellent.
£0.99
1 bid
craiglawtondesigns 47
USB Puzzle - Craig Lawton Designs
For all the tech lovers out there, USB puzzle is an oversized version of its original counterpart, but with tools, trick openings and a cunning solution.Objective: Release the USB symbol.Sounds easy enough, right?Dimensions (approx.) 14cm x 5cm x 2.5cmColour: WhiteMade from acrylic and laser MDF, including magnets/small metal parts.Assembled by hand.Designed by Craig Lawton.Note: This puzzle will open easily when solved correctly. Excessive force is not required.Not suitable for small children.U...
£75.00
craiglawtondesigns 47
Cassette Puzzle - Craig Lawton Designs
For those who love all things retro, Cassette puzzle is an oversized version of its original counterpart, but with tools, trick openings and a cunning solution.Objective: Release the 'Please, release me' token from the centre window of the cassette.Sounds easy enough, right?Dimensions (approx.) 14cm x 9cm x 2cmColour: Black/YellowMade from acrylic and laser MDF, including magnets/small metal parts.Assembled by hand.Designed by Craig Lawton.Note: This puzzle will open easily when solved correctly...
£85.00
craiglawtondesigns 47
USB Puzzle - Craig Lawton Designs
For all the tech lovers out there, USB puzzle is an oversized version of its original counterpart, but with tools, trick openings and a cunning solution.Objective: Release the USB symbol.Sounds easy enough, right?Dimensions (approx.) 14cm x 5cm x 2.5cmColour: GreenMade from acrylic and laser MDF, including magnets/small metal parts.Assembled by hand.Designed by Craig Lawton.Note: This puzzle will open easily when solved correctly. Excessive force is not required.Not suitable for small children.U...
£75.00
craiglawtondesigns 47
USB Puzzle - Craig Lawton Designs
For all the tech lovers out there, USB puzzle is an oversized version of its original counterpart, but with tools, trick openings and a cunning solution.Objective: Release the USB symbol.Sounds easy enough, right?Dimensions (approx.) 14cm x 5cm x 2.5cmColour: OrangeMade from acrylic and laser MDF, including magnets/small metal parts.Assembled by hand.Designed by Craig Lawton.Note: This puzzle will open easily when solved correctly. Excessive force is not required.Not suitable for small children....
£75.00
craiglawtondesigns 47
SERIES HEX Number 1 - Craig Lawton Designs
SERIES HEX Number 1.This is the first puzzle in my second series, SERIES HEX.Quite simply, can you figure out how to take it apart?Sounds easy perhaps, but with various internal mechanisms and components, it may not be as easy as it seems.Approx. 9cm wide, it fits nicely in the palm of your hand.Made from laser MDF and acrylic, including magnets/small metal parts.Assembled by hand.Designed by Craig Lawton.Note: This puzzle will open easily when solved correctly. Excessive force is not required.N...
£60.00
craiglawtondesigns 47
SERIES HEX #2 - Craig Lawton Designs
SERIES HEX Number 2.This is the second puzzle in my second series, SERIES HEX.Quite simply, can you figure out how to take it apart?Sounds easy perhaps, but with various internal mechanisms and components, it may not be as easy as it seems.Approx. 9cm wide, it fits nicely in the palm of your hand.Made from laser MDF and acrylic, including magnets/small metal parts.Assembled by hand.Designed by Craig Lawton.Note: This puzzle will open easily when solved correctly. Excessive force is not required....
£60.00
-500x500.jpg)
craiglawtondesigns 47
9 Layer Puzzle #2 - Craig Lawton Designs
9 Layer Puzzle #2.This is the second puzzle in my 9 Layer series.Quite simply, can you figure out how to open it?Sounds easy perhaps, but with various internal mechanisms and components, it may not be as easy as it seems.7.5cm square and fits nicely in the palm of your hand.Has a small compartment inside to keep a valuable item.Made from laser MDF and acrylic, including magnets/small metal parts.Assembled by hand.Designed by Craig Lawton.Note: This puzzle will open easily when solved correctly. ...
£49.00
craiglawtondesigns 47
9 Layer Puzzle #3 - Craig Lawton Designs
9 Layer Puzzle #3.This is the third puzzle in my Layer series.Quite simply, can you figure out how to take it apart?Sounds easy perhaps, but with various internal mechanisms and components, it may not be as easy as it seems.7.5cm square and fits nicely in the palm of your hand.Made from laser MDF and acrylic, including magnets/small metal parts.Assembled by hand.Designed by Craig Lawton.Note: This puzzle will open easily when solved correctly. Excessive force is not required.Not suitable for sma...
£49.00
-500x500.jpg)
craiglawtondesigns 47
9 Layer Puzzle #8 - Craig Lawton Designs
9 Layer Puzzle #8.This is the eighth puzzle in my 9 Layer series.Quite simply, can you figure out how to take it apart?Sounds easy perhaps, but with various internal mechanisms and components, it may not be as easy as it seems.7.5cm square and fits nicely in the palm of your hand.Made from laser MDF and acrylic, magnets/including small metal parts.Assembled by hand.Designed by Craig Lawton.Note: This puzzle will open easily when solved correctly. Excessive force is not required.Not suitable for ...
£49.00
-500x500.jpg)
craiglawtondesigns 47
9 Layer Puzzle #9 - Craig Lawton Designs
9 Layer Puzzle #9.This is the ninth puzzle in my 9 Layer series.Quite simply, can you figure out how to take it apart?Sounds easy perhaps, but with various internal mechanisms and components, it may not be as easy as it seems.7.5cm square and fits nicely in the palm of your hand.Made from laser MDF and acrylic, including magnets/small metal parts.Assembled by hand.Designed by Craig Lawton.Note: This puzzle will open easily when solved correctly. Excessive force is not required.Not suitable for s...
£49.00
-500x500.jpg)
craiglawtondesigns 47
SERIES HEX #6 - Craig Lawton Designs
SERIES HEX #6.This is the sixth puzzle in my second series, SERIES HEX.Quite simply, can you figure out how to take it apart?Sounds easy perhaps, but with various internal mechanisms and components, it may not be as easy as it seems.Approx. 9cm wide, it fits nicely in the palm of your hand.Made from laser MDF and acrylic, including magnets/small metal parts.Assembled by hand.Designed by Craig Lawton.Note: This puzzle will open easily when solved correctly. Excessive force is not required.Not sui...
£60.00
-500x500.jpg)
craiglawtondesigns 47
Special / Limited Edition 9 Layer Puzzle #1 - Craig Lawton Designs
To celebrate the release of my very first puzzle, here's a special/limited edition of my 9 Layer Puzzle #1.With all acrylic layers, plus a unique edition number, the v2 model - although based on the original - has additional mechs to make the solve more complicated. Because that's what we like!Quite simply, can you figure out how to open it?Sounds easy perhaps, but with various internal mechanisms and components, it may not be as easy as it seems.7.5cm square and fits nicely in the palm of your ...
£65.00