Claw 3designed by Alfons Eyckmanscrafted by Eric Fuller (2013)condition: as newdescription: A distinctive 10-piece interlocking puzzle where three large claw-shaped pieces wrap around a small 4×4 cube. The unique level 7 solution is tricky, while the unusual shape makes Claw 3 stand out. Crafted from Canarywood and Sapele.product page: https://cubicdissection.com/products/claw-3The item will be shipped from Budapest, Hungary. Shipping costs will be calculated after bidding has ended. Multiple i...

Just The Threedesigned by Jack Krijnencrafted by Eric Fullercondition: as newdescription: One of the finest three-piece burr designs, crafted by Eric in a small batch. Its complex 3x3 cross-section pieces reach level 7.2, and assemble into the classic cross silhouette also seen in the CubicDissection logo. Made from carefully matched Sapele with Eric’s exceptionally precise fit, this is a rare early Fuller piece that combines serious difficulty, beautiful craftsmanship and strong collector app...

Bill's Ball Bearing Burrdesigned by Bill Cutlercrafted by Eric Fuller (2019)condition: as newdescription: A classic six-piece burr with two stainless-steel ball bearings hidden inside. To disassemble the puzzle, first the bearings must be manipulated into the correct positions to unlock the movement of the burr pieces. Crafted from dense Jatoba with extremely precise tolerances, each unit is signed and dated.product page: https://cubicdissection.com/products/bills-ball-bearing-burrThe item will ...

L5 Notchabledesigned by Bill Cutlercrafted by Eric Fuller (2019)condition: as newmaterials: White Gaboon Ebonydescription: A fantastic Bill Cutler design, made by Eric Fuller in only a few copies using unique woods. This version was crafted from White Gaboon Ebony, making it an especially unusual piece. A simple-looking burr with plenty of collector appeal.The item will be shipped from Budapest, Hungary. Shipping costs will be calculated after bidding has ended. Multiple items may be combined fo...

Triaxedesigned by Stéphane Chominecrafted by Eric Fuller (2013)condition: as newdescription: The pieces interlock inside a highly restrictive cage, creating a fun level-24 solution with plenty of movement and dead ends. Despite its complexity, it is a highly enjoyable and playable puzzle with excellent craftsmanship.product page: https://cubicdissection.com/products/triaxeThe item will be shipped from Budapest, Hungary. Shipping costs will be calculated after bidding has ended. Multiple items m...

Tortoisedesigned by Alexander Haydon O’Briencrafted by Pelikan (2017)condition: great fit, perfect conditiondescription: A beautiful tortoise-shaped framed burr crafted by Pelikan from Dark Oak, Acacia and Wenge. The shell pattern inspired the design, and the level 17.4 solution is very approachable without becoming frustrating. The large sculptural form, visible mechanics and excellent fit make Tortoise both a very playable puzzle and an impressive display piece.product page: https://www.peli...

Five Piece Clusterdesigned by Stewart Coffincrafted by Eric Fuller (2015)condition: as newdescription: A companion to Cluster with Child, built into the same 19-piece rhombic dodecahedron form but dissected into five pieces instead of four. The complex, asymmetrical pieces interlock around a simple fifth key piece, creating a tricky serial assembly. Crafted from Ash and Lacewood with the opposite wood placement of Cluster with Child, the pair looks especially good displayed together.product page...

Cage for Four Sticksdesigned by Stéphane Chominecrafted by Eric Fuller (2012)condition: as newdescription: Cage for Four Sticks combines an attractive wooden frame with a surprisingly complex four-piece assembly designed by Stéphane Chomine. The sticks move and change positions in unexpected ways, leading to a unique level 24.6.3 solution that makes this large puzzle both challenging and highly playable. Crafted from contrasting Sapele and Maple woods, this rare 2012 edition was limited to jus...

Four in Twodesigned by Stéphane Chominecrafted by Eric Fuller (2011)condition: as newdescription: It's a striking interlocking puzzle designed by Stéphane Chomine, with four burr sticks holding together two frames. Its 45-step solution makes it a challenging assembly, while the rich Walnut and Mahogany combination gives the puzzle a beautiful, classic look.product page: https://cubicdissection.com/products/four-in-twoThe item will be shipped from Budapest, Hungary. Shipping costs will be calcu...

Accordiandesigned by William Hucrafted by Eric Fuller (2014)condition: as new, still bright red Chakte Viga wooddescription: An unusual interlocking puzzle crafted from White Oak and Chakte Viga. Its level 9 solution relies on a tricky rotational move that makes the puzzle feel very different from a typical interlocking assembly puzzle. Simple-looking, but surprisingly difficult to figure out.product page: https://cubicdissection.com/products/accordianThe item will be shipped from Budapest, Hung...

Stand Py Medesigned by Gregory Benedetticrafted by Eric Fuller (2011)condition: as newdescription: An unusual take on the classic Coffin cube pyramid shape, crafted from Wenge, Zebrawood and Maple. Its level 5.1.2 solution is not too difficult.product page: https://cubicdissection.com/products/stand-py-meThe item will be shipped from Budapest, Hungary. Shipping costs will be calculated after bidding has ended. Multiple items may be combined for shipping upon request. Accepted payment methods are...

Cluster with Childdesigned by George Bellcrafted by Eric Fuller (2015)condition: as newdescription: A rare and unique four-piece puzzle that interlocks into a 19-piece rhombic dodecahedron form. Three similar pieces wrap around each other, while a fourth key piece locks the whole assembly together using coordinate motion.product page: https://cubicdissection.com/products/cluster-with-childThe item will be shipped from Budapest, Hungary. Shipping costs will be calculated after bidding has ended. ...

Description:Cubyful is an interesting interlocking packing puzzle by Lucie. Seven fairly simple pieces must pack into the box...the tricky part is the captive piece which must be accounted for during assembly. With a level 1.2.6.2.2.5 solution, figuring this out is anything but simple! A fun challenge for the experienced puzzler, yet doable for a determined novice.Beautifully crafted in Leopardwood, Wenge and AshPayment : PayPal (F&F preferred or fees to be paid by buyer). Wait until the auction...

Bonjour à tous A la mémoire de Stéphane Chomine créateur de puzzle décédé subitement le 16 septembre 2026.Apprécié de tous les collectionneurs de notre communauté. Hélas plus aucune nouveauté de sa part J'ai décidé de mettre en vente quelques exemplaires en stock dans mon atelier tous créés par lui même (Grand merci à mon ami)Les heureux acheteurs auront la chance de posséder mes dernières fabrications de ce créateur de génieCar moi même Maurice Vigouroux à 85 ans j'ai ...

- The pimple- Danny- Key bunch- Out of center 2- Aurelie5 beautiful puzzles built and designed by Alfons EyckmansShipping cost is included

Hey, I want to sell the cute Turtles Puzzle which was designed and build by Pelikan.Only 50 were ever made and this copy is #45 of 50.It's a numbered series.I will ship also to the USA!Also have a look at all my other listings!Shipping can be combined if you are winning more than one of my auctions. The shipping costs will be calculated after the auction. Please contact me if you have any questions about shipping.

Hey, I want to sell this rare puzzle by Wayne Daniels.It'e the Icosahedron - Chinese B.I will ship also to the USA!Also have a look at all my other listings!Shipping can be combined if you are winning more than one of my auctions. The shipping costs will be calculated after the auction. Please contact me if you have any questions about shipping.

Hey, I want to sell the Helical Burr which was designed by Derek Bosch and build by Steve Nicholls from Two Brass Monkeys in ABS plastic.It's the winner of the Jury Grand Prize at IPP 33.I will ship also to the USA!Also have a look at all my other listings!Shipping can be combined if you are winning more than one of my auctions. The shipping costs will be calculated after the auction. Please contact me if you have any questions about shipping.

Hey, I want to sell the Sixteen Piece Jigsaw which was designed by Osakr van Deventer and build by PuzzleGuyStoreI will ship also to the USA!Also have a look at all my other listings!Shipping can be combined if you are winning more than one of my auctions. The shipping costs will be calculated after the auction. Please contact me if you have any questions about shipping.

Hey, I want to sell Scorpius which was designed by Stewart Coffin.There is a tiny wooden pin which holds the pieces together.I will ship also to the USA!Also have a look at all my other listings!Shipping can be combined if you are winning more than one of my auctions. The shipping costs will be calculated after the auction. The buyer has to pay the shipping costs but of course no PayPal fees. :)Please contact me if you have any questions about shipping.