Grooved Three Piece Burr

This puzzle designed by Kouki Kusumi adds a new challenge to a standard three piece burr with thanks to the groove in each pieces. Comes in excellent condition and comes ...

44.00 USD
First123 (38 )

0 bids  

The Push Box #1

I am making available the Push Box Puzzle that was offered at IPP34 as part of Simon Nightingale's puzzle exchange.but it does not extend fully. I will carefully wr...

100.00 GBP
daveyh (4 )

0 bids  

Viking box

Move around the metal balls using sliding parts as well as wheels/knobs. Placing them into the right position In order to remove the lid. The box has slight wear that na...

80.00 USD
Boehler (0)

0 bids  

Marcel Gillen's Fire Plug

Designer: Marcel Gillen (Bits&Pieces)Condition: as shown, works greatSome info: 

200.00 USD
monopoles (6 )

1 bid  

Lunatic Lock

Designer: Gary Foshee (Bits&Pieces version)Condition: as shown, works perfectSome info: 

100.00 USD
monopoles (6 )

0 bids  

Strijbos' EGG

Designer: Wil StrijbosCondition: essentially new, solved onceSome info: 

345.00 USD
monopoles (6 )

0 bids  

Internal Combustion / Piston Box

Designer: Tadao MuroiCondition: as shown, works greatSome info: 

100.00 USD
monopoles (6 )

0 bids  

TaiJi

Designer: Ayi LiuCondition: essentially new, never solvedSome info: 

135.00 USD
monopoles (6 )

0 bids  

Tumbler

Designer: Jon KeeganCondition: essentially new, solved onceSome info: 

180.00 USD
monopoles (6 )

0 bids  

Double Tumbler

Designer: Jon KeeganCondition: essentially new, solved onceSome info: 

200.00 USD
monopoles (6 )

0 bids  

Oskar's Buffalo Nickel

Designer: Oskar van Deventer (IPP exchange and manufactured by George Miller)Condition: like newSome info: 2-dimensional burr requiring 9 + 1/2 moves, 

145.00 USD
monopoles (6 )

0 bids  

Titan's Treasure lock

Designer: Sashko PeshevskiCondition: essentially new, solved onceSome info: 

100.00 USD
monopoles (6 )

0 bids  

Cigar Cutter trick locks

Designer: Charles Tayler (1915 US patent 1136735)Condition: all work great, same designSome info: A neat novelty lock, AKA "bashful" lock. Try to pull apart the...

30.00 USD
monopoles (6 )

0 bids  

Her Key to the Treasure

Designer: Sashko PeshevskiCondition: essentially new, solved a few timesSome info: 

200.00 USD
monopoles (6 )

0 bids  

Rademic's hedgehogs

Classic (10 spikes) - anodized aluminumAxis (6 spikes) - stainless steelCondition: essentially new, solved oncehttps://www.youtube.com/watch?v=iWmy-YUDzGc&thttps://www.pu...

185.00 USD
monopoles (6 )

1 bid  

A Plugged Well

A plugged well is the classic puzzle designed and made by Brian Young.  The goal of the puzzle is to find the oil barrel. Buyer to pay shipping which can be determined...

1,075.00 USD
Boehler (0)

24 bids  

Aquarius+

Stephane Chomine's Aquarius+, via Cubic Dissection in Spalted Maple, Wenge, and Canarywood.Solved once; In good condition.Winner to contact after auction concludes t...

50.00 USD
tomburns (2 )

1 bid  

Zen Puzzle

Description: Zen Puzzle was manufactured in 1987 by the artist and sculptor Charles O Perry, who passed in 2011. Despite being over 30 years old this Zen Puzzle is in su...

250.00 USD
chrislinnick (4 )

1 bid  

GeneTIC

Description: GeneTIC. Turning interlocking cube (TIC) puzzled designed by the infamous Andrew Crowell. Rumor has it Andrew Crowell and Chuck Norris are best friends in ...

70.00 USD
chrislinnick (4 )

3 bids  

Trap R2

Designer Osanori YamamotoBuyer to pay for shipping to be determined at the end of auction. Thanks

60.00 USD
Boehler (0)

1 bid  

Washington Monument

Designed by Brian Young. Buyer to pay for shipping to be determined at the end of auction. Thanks

510.00 USD
Boehler (0)

13 bids  

Trap R2

Designer Osanori YamamotoBuyer to pay for shipping to be determined at the end of auction. Thanks

60.00 USD
Boehler (0)

1 bid  

Sloot 3 ~ Cubic Dissection / Alfons Eyckmans

Sloot 3 is a fantastic six piece board burr. The design allows for some very unusual movements and configurations while maintaining stability. This copy has been solved t...

70.00 USD
Rakasis (4 )

0 bids  

Starburst

Designed and 3D printed by Lee Krasnow. Starburst is a twelve piece puzzle that can be easily disassembled. The real challenge is reassembling it. You'll certain...

10.00 USD
josiah1221 (23 )

1 bid  

Eight Cross

Designed by Mike Quigley and made by LaserPuzzles. The primary goal of Eight Cross is to put all eight pieces in the square tray to make eight complete crosses. Addition...

25.00 USD
josiah1221 (23 )

4 bids  

Amaze Cube

A 3D "ball-in-a-maze" puzzle similar to the Perplexus series. Maneuver the metal ball through the 3D labyrinth with slopes, platforms, spirals, stairs, 90 degre...

15.00 USD
josiah1221 (23 )

2 bids  

Mini Thor's Hammer

A sequential discovery take apart puzzle made from Cedar designed and created by BeardswoodshopCo.[Actual shipping and handling cost will be calculated at end of auction....

30.00 USD
josiah1221 (23 )

4 bids  

Dirty Dozen

Designed by Jerry Loo and produced by PuzzleMaster. Dirty Dozen is an attractive orange anodized metal puzzle made up of 12 identical interlocking pieces. This hefty ...

10.00 USD
josiah1221 (23 )

1 bid  

Triad

Produced by PuzzleMaster. Triad is made of sturdy and richly colored anodized metal. The puzzle will disassemble into three separate pieces.  The objective is to take it...

10.00 USD
josiah1221 (23 )

1 bid  

Corner Cube

Designed and 3D printed by Lee Krasnow. Corner Cube is a six piece puzzle that can be easily disassembled. The real challenge is reassembling it. You'll certainly ha...

15.00 USD
josiah1221 (23 )

3 bids  

Packing Puzzle 4P

Designed by Hajime Katsumoto and produced by MINE (Mineyuki Uyematsu) in acrylic.The goal is to pack the 4 P shaped pieces into the tray. There are 2 problems to work out...

55.00 USD
josiah1221 (23 )

8 bids  

POCKET

Designed by Koichi Miura and produced by MINE (Mineyuki Uyematsu) in acrylic.The goal is to put the 4 pieces in the pocket. There are 2 sets of 4 pieces creating 2 proble...

55.00 USD
josiah1221 (23 )

7 bids  

Tetra Spinner

Designed by Yasuhiro Hashimoto and produced by MINE (Mineyuki Uyematsu) in acrylic.The goal is to put the 5 tetromino pieces into the frame making sure the frame is cente...

55.00 USD
josiah1221 (23 )

7 bids  

Legal Packing

Designed by Koichi Miura and produced by MINE (Mineyuki Uyematsu) in acrylic.The puzzle is pictured and received in an illegal state (because force is required to achieve...

69.00 USD
josiah1221 (23 )

9 bids  

Safe

Designed by Jürgen Reiche, the Safe is a double maze made by the German company Siebenstein-Spiele. There’s a Euro trapped inside the frame and you need to maneuve...

30.00 USD
josiah1221 (23 )

3 bids  

GeneTIC

Description: GeneTIC. Turning interlocking cube (TIC) puzzled designed by the infamous Andrew Crowell. Rumor has it Andrew Crowell and Chuck Norris are best friends in ...

70.00 USD
chrislinnick (4 )

3 bids  

Pelikan Slideways ball.

Diameter of the ball is 59mm.We used Cherry, Acacia and Maple.Kevin Sadler wrote about it: "This ball is the third in the series based on ray Stanton's Slidewa...

50.00 USD
REV (0)

0 bids  

Capricorn

Alfons Eyckmans Capricorn cube.  Buyer pays shipping and 3% PayPal fee or sends to friends and family 

55.00 USD
REV (0)

2 bids  

Zachary

Alfons Eyckmans Zaccube.  Buyer pays shipping and 3% PayPal fee or sends to friends and family 

50.00 USD
REV (0)

1 bid  

Kalinka

Alfons Eyckmans kali cube.  Buyer pays shipping and 3% PayPal fee or sends to friends and family 

65.00 USD
REV (0)

3 bids