Showing results 1 to 20
Ginosergios 9
Filebox, by Yavuz Demirhan
Filebox is… an old filing cabinet, like those metal drawers with hanging folders to store and archive documents. So, you find the gray drawer, two white folders, and three documents to store… Until you get to what you see in the first photo.It's not easy at all. Are you up for the challenge?Dimensions: approximately 76 x 56 x 42 mm.“Filebox” is produced and sold under license from Yavuz Demirhan (https://www.puzzlehub.org/puzzles/yavuz-demirhan) who is the Designer and Copyright Owner.I ...
€14.00
Ginosergios 9
Mario's Brick Block Puzzle Box, by Joseph Kovell
"Mario's Brick Block Puzzle Box" (https://www.printables.com/model/81772-brick-block-puzzle-box) was designed by Joseph Kovell of 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution License (CC BY 4.0) that allows commercial use. I make this puzzle with a 3D printer and good quality filaments. To solve Mario's Brick Block Puzzle Box, you have to find a way to open it. You only need a few moves, but you have to understand where to do them, and how !  This puzzle ...
€25.00
Ginosergios 9
The Shield Puzzle Box
This Medieval-inspired Puzzle Box opens by manipulating the shield sections on the top lid.This puzzle isn't difficult, and with its internal compartment, it's ideal for hiding or giving away small items, jewels, money, or whatever you want! The internal compartment measures approximately 85 x 55 x 50 mm deep.External dimensions: approximately 100 x 75 x 75 mm."The Shield Puzzle Box" (https://www.thingiverse.com/thing:6803031) was designed by Hollowvoice and shared under the Creative Commons At...
€20.00
Ginosergios 9
Poco Loco, by Yavuz Demirhan
Poco Loco is a Packing Puzzle with one oddity: two pieces are already in the container !  But despite this, there aren't many moves to complete it, nor are they particularly difficult. There are only four identical pieces to insert. No rotations are necessary.Poco Loco is a puzzle made of PLA Wood, a wood-like filament.Dimensions: approximately 70 x 60 x 60 mm.I ship from Italy all over the World. You will choose the courier / shipping methods and you are responsible for custom duties.  For an...
€12.00
Ginosergios 9
Framed Chaos, by Lucie Pauwels
This is a Packing Puzzle slightly different than usual. You have four pieces to fit into a frame, but this time the frame is "undefined"! It's made up of two parts that can obviously be flipped and rotated, thus generating quite a few possible combinations! To avoid spoilers, in the last photo the lines dividing the pieces have been deleted...Dimensions: 60 x 60 x 20 mm.I ship from Italy all over the World. You will choose the courier / shipping methods and you are responsible for custom duties...
€8.00
Ginosergios 9
Brick Wall, by Lucie Pauwels
This Brick Wall is missing the mortar to fill the spaces between the bricks. You'll find it in a container on the back, with a lid, convenient for storing or carrying your puzzle.Will you be able to arrange all the mortar pieces and complete the wall? Good luck!It's a beautiful puzzle, with bricks made of PLA Wood and mortar made of PLA Marble.Dimensions: 120 x 90 x 20 mm.I ship from Italy all over the World. You will choose the courier / shipping methods and you are responsible for custom dutie...
€15.00
Ginosergios 9
The Barrel's Cooper, by Joseph Kovell
"The Barrel's Cooper" (https://www.printables.com/model/143296-barrel-coopers-puzzle-box) was designed by Joseph Kovell of 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution License (CC BY 4.0) that allows commercial use. I make this puzzle with a 3D printer and good quality filaments. To solve The Barrel's Cooper, you'll need to open two secret compartments and find the "Solved" sign that certifies your success.  This puzzle ships with a nice display stand.Dim...
€40.00
Ginosergios 9
Gear Fit, by Oskar Van Deventer
A puzzle that at first glance seems simple. Just two strange gears to assemble. The goal is to assemble them so that they can rotate freely "infinitely" (i.e., 360 degrees) relative to each other without getting stuck.Each gear must be positioned on a star-shaped pin that allows only 7 different positions. However, consider that each gear can be flipped... and mounted on the right or left. In short, there are already 28 possibilities for each gear. Needless to say, the first photo is not the sol...
€12.00
Ginosergios 9
Nut Stack, by Oskar Van Deventer
Nut Stack: Four strange bolts are screwed onto a grub screw, and the whole thing is then placed in the container, whose shape corresponds to the "solution"! The bolts must touch each other; if there's a gap even less than 1 mm, the solution isn't right.You'll have to deal with the order of the bolts, as well as their orientation. Luckily, they can only be screwed in two ways! The bolts are numbered to help you keep track of your attempts!Dimensions: approximately 80 x 65 x 60 mm.“Nut Stack” ...
€14.00
Ginosergios 9
Treasure Chest Puzzle Box, by Joseph Kovell
"Treasure Chest Puzzle Box" (https://3dprinty.xyz/project/36) was designed by Joseph Kovell of 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution License (CC BY 4.0) that allows commercial use. I make this puzzle with a 3D printer and good quality wood filaments. To solve The Barrel's Cooper, you'll need to find a way to open it. This puzzle is also great for giving gifts, in its compartment you can put money, a ring, earrings... the exact dimensions of the compa...
€16.00
Ginosergios 9
Gear Fit, by Oskar Van Deventer
A puzzle that at first glance seems simple. Just two strange gears to assemble. The goal is to assemble them so that they can rotate freely "infinitely" (i.e., 360 degrees) relative to each other without getting stuck.Each gear must be positioned on a star-shaped pin that allows only 7 different positions. However, consider that each gear can be flipped... and mounted on the right or left. In short, there are already 28 possibilities for each gear. Needless to say, the first photo is not the sol...
€12.00
Ginosergios 9
6-Alarm Puzzle Box, by Joseph Kovell
"6-Alarm Puzzle Box" (https://www.printables.com/model/919082-6-alarm-puzzle-box) was designed by Joseph Kovell of 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution License (CC BY 4.0) that allows commercial use. I make this puzzle with a 3D printer and good quality filaments.  To solve 6-Alarm Puzzle Box, you'll need to open it, and find the 2 Bitcoin hidden inside.  Dimensions: 175 x 115 x 80 mm.    I ship from Italy all over the World. You will c...
€35.00
Ginosergios 9
Manneken, by Yavuz Demirhan
Manneken is a Packing Puzzle that requires you to place 6 pieces inside a container. For a valid solution, no piece must protrude outside the container.  The opening has a unique shape and significantly limits the possibilities for inserting the pieces.  A very simple puzzle in its premise, but not easy to solve!Dimensions: approximately 64 x 64 x 50 mm.“Manneken” is produced and sold under license from Yavuz Demirhan (https://www.puzzlehub.org/puzzles/yavuz-demirhan) who is the Designer...
€10.00
Ginosergios 9
Minimal Frame, by Lucie Pauwels
This is a unique puzzle. It is really a minimal frame, covering only two corners. To solve the puzzle, you need to arrange the pieces within the "frame," but the puzzle is only solved when the pieces remain embedded within the frame and do not fall out when you push them outward, on the four sides.There are 39 possible combinations that allow you to fit all the pieces into the frame, but only one is correct !Dimensions: 70 x 70 x 25 mm."Minimal Frame" is a Puzzle printed and sold under license f...
€10.00
Ginosergios 9
Screw Wall, by Oskar Van Deventer
In this puzzle, you have seven screws, each with a different thread, and a container with seven holes to screw the screws into.It might seem simple—each screw fits into a hole with the same thread—but in reality, that's not the case. The holes have multiple threads, so some screws can fit into two different holes, some into three, and some into even four.  It's up to you to find the right combination!Dimensions: approximately 100 x 60 x 20 mm.“Screw Wall” is produced and sold under lic...
€15.00
Ginosergios 9
Quadro, by Yavuz Demirhan
In this puzzle you'll have to fit 6 identical pieces into the box. The container has a limited opening, making it difficult to fit the pieces.Quadro is printed with PLA Wood filament.Dimensions: approximately 85 x 65 x 55 mm.“Quadro” is produced and sold under license from Yavuz Demirhan (https://www.puzzlehub.org/puzzles/yavuz-demirhan) who is the Designer and Copyright Owner.I ship from Italy all over the World. You will choose the courier / shipping methods and you are responsible for cus...
€12.00
Ginosergios 9
Snake Pit, by Yavuz Demirhan
In Snake Pit, you'll have to fit the 8 "snakes" into their lair. The container has a limited opening, making it difficult to fit the pieces.Snake Pit is made with PLA Wood filament.Dimensions: approximately 70 x 70 x 40 mm.I ship from Italy all over the World. You will choose the courier / shipping methods and you are responsible for custom duties.  For any questions and to allow me to change the shipping costs, please ask before bidding.“Snake Pit” is produced and sold under license from Y...
€12.00
Ginosergios 9
Pin-Up Box, by Lucie Pauwels
Pin-up Box is a puzzle with two requirements: you don't just insert all the pieces into the container, you also need to secure them with a side pin, and by turning the box upside down, no piece should fall out!It's not difficult, and it's a very beautiful puzzle, made of PLA Wood.Dimensions: approximately 105 x 60 x 45 mm.I ship from Italy all over the World. You will choose the courier / shipping methods and you are responsible for custom duties.  For any questions and to allow me to change th...
€12.00