Gergo 293
PenTIC by Andrew Crowell and Eric Fuller
PenTICdesigned by Andrew Crowellcrafted by Eric Fuller (2019)condition: as newdescription: This is closer to a traditional TIC puzzle, but built from pentomino based geometry. The open frame structure, tightly constrained internal interactions, and unusual piece shapes make PenTIC difficult to assemble, with five contrasting exotic woods turning it into a nice display piece too.product page: https://cubicdissection.com/products/pentic-interlocking-cubeThe item will be shipped from Budapest, Hung...
€120.00
0 bids
Gergo 293
4L by Yasuhiro Hashimoto and Eric Fuller
4Ldesigned by Yasuhiro Hashimotocrafted by Eric Fuller (2018)condition: as newdescription: One of the best four piece packing puzzles, built around a restricted opening box and two pairs of L shaped pieces. The pieces have to dance around each other inside the box before enough space opens for the final piece to fit, making it a fun and approachable puzzle even for non puzzlers. The design received an Honorable Mention at IPP 2015.product page: https://cubicdissection.com/products/4l-1The item w...
€90.00
0 bids
Gergo 293
Tronc Commun 1-3 set by Gregory Benedetti and Eric Fuller
Tronc Commun 1-2-3 setdesigned by Gregory Benedetticrafted by Eric Fullercondition: as newdescription: a clever three-puzzle set built around the same two-piece core. Each version wraps that core with a different outer set, so the mechanism stays familiar while the logic steadily ramps up. The fun comes from learning how the shared core behaves, then having that knowledge tested as later versions tighten the freedoms and introduce trap-like near-assemblies.product page: https://cubicdissection.c...
€210.00
0 bids
Gergo 293
Cerradura 3D by Robrecht Louage
Cerradura 3Dby Robrecht Louagecondition: excellent, solution sheet includeddescription: a rare (18 units) path-finding lock puzzle built around strict sequential movement, originally created as a 2009 IPP design-competition entry. The full solve runs 114 steps, advancing a trapped mechanism through a controlled route until the lock finally opens. The treated black wooden pieces give it a unique look that matches the interesting solve.product page: https://cubicdissection.com/products/cerradura-3...
€230.00
0 bids
Gergo 293
De Kas by Alfons Eyckmans and Eric Fuller
De Kasdesigned by Alfons Eyckmanscrafted by Eric Fullercondition: as newdescription: it's Alfons Eyckmans’ next-step evolution after Spiral and Steps, with six board-burr plates wrapped around four unique 8-unit burr pieces. It takes a 24-move sequence to free the first piece, demanding patience and careful control. Reassembly without any help is practically impossible. In Canarywood and Padauk it’s a stunning display, and even the half-assembled states look like intentional modern sculpture...
€120.00
0 bids
Gergo 293
Janus by Jeff Namkung and Eric Fuller
Janusdesigned by Jeff Namkungcrafted by Eric Fuller (2016)condition: as newdescription: a five piece interlocking 4x4x4 cube with a level 11.4 solution and a deceptively open disassembly path. Its unusually large size sets it apart from most other Eric Fuller interlocking cubes, while the precise fit gives each move a crisp, distinct click.product page: https://cubicdissection.com/products/janusThe item will be shipped from Budapest, Hungary. Shipping costs will be calculated after bidding has ...
€115.00
0 bids
Gergo 293
Parasitic Burr (Jatoba version) by Tyler Hudson and Eric Fuller
Parasitic Burrdesigned by Tyler Hudsoncrafted by Eric Fuller (2023)condition: as newmaterials: Jatoba, Ashdescription: A traditional six piece burr with two identical tetracubes enclosed inside the assembly. The solve is not overly difficult, but finding the correct placement and movement of the internal pieces adds an extra layer of challenge.product page: https://cubicdissection.com/products/parasitic-burrThe item will be shipped from Budapest, Hungary. Shipping costs will be calculated after ...
€120.00
0 bids
Gergo 293
Spacemine by Eric Fuller
Spaceminedesigned by Yavuz Demirhancrafted by Eric Fuller (2013)condition: as newdescription: Three burr sticks and a two piece cage come together to form a symmetric, classic puzzle shape. The level 4.5 solution is approachable while still offering a fun and unique assembly experience.product page: https://cubicdissection.com/products/spacemineThe item will be shipped from Budapest, Hungary. Shipping costs will be calculated after bidding has ended. Multiple items may be combined for shipping u...
€135.00
0 bids
Gergo 293
Ribbons by Tom Jolly and Eric Fuller
Ribbonsdesigned by Tom Jollycrafted by Eric Fuller (2011)condition: as newdescription: A surprisingly fun six piece burr built in the style of a three piece burr puzzle. The open structure makes the solve approachable, although there are still plenty of dead ends and tricky steps along the way. A classic puzzle that offers a lot of fun in a compact package.product page: https://cubicdissection.com/products/ribbonsThe item will be shipped from Budapest, Hungary. Shipping costs will be calculated ...
€135.00
0 bids
Gergo 293
Parasitic Burr (mixed woods version) by Tyler Hudson and Eric Fuller
Parasitic Burrdesigned by Tyler Hudsoncrafted by Eric Fuller (2023)condition: as newmaterials: Maple, Purpleheart, Jatoba, Black Limbadescription: A traditional six piece burr with two identical tetracubes enclosed inside the assembly. The solve is not overly difficult, but finding the correct placement and movement of the internal pieces adds an extra layer of challenge.product page: https://cubicdissection.com/products/parasitic-burrThe item will be shipped from Budapest, Hungary. Shipping cos...
€120.00
0 bids
Gergo 293
Mini Chessboard by William Hu and Eric Fuller
Mini Chessboarddesigned by William Hucrafted by Eric Fuller (2015)condition: as newdescription: A beautiful assembly puzzle made from Peruvian Walnut and contrasting Maple, where a collection of polycube pieces must be arranged into a perfect checkerboard pattern inside a unique tray. The challenge lies in finding the correct placement of the pieces and then discovering the sequence of sliding paths required for the unique solution. A very fun, attractive, and rare puzzle.product page: https://c...
€160.00
0 bids
Canuck 408
Tube It In 2 - William Hu by John Devost
I’m sure everyone is quite familiar with William Strijbos’ original Tube It In design so I don’t think I need to give a lengthy description but should say that William Hu came up with a novel design twist on this awesome puzzle and he has graciously allowed me to make a small run.I’ve long since left the puzzle scene after completely retiring, however I did finish up a select few of these and thought I’d offer them up for sale.This puzzle is crafted from Canarywood with Purpleheart Sli...
$175.00
0 bids
Canuck 408
Gouge Packing Puzzle - Gaétan Gouge by John Devost
I previously made a few of this surprisingly difficult packing puzzle by Gaétan and at the time I didn’t have any contact info for him but then a few years ago I was surprised by one of his puzzle purchases in ‘Paradise’.My plan was to make another run but life kinda’ took a turn so now I’ve managed to sort myself out and began making another run.Allard kindly blogged about the copies I made in 2014, here’s an excerpt:https://allardspuzzlingtimes.blogspot.com/2014/04/gouge-packing-p...
$75.00
0 bids
Canuck 408
Parcel Post by John Devost
This classic design was one of my earliest puzzle builds in the early 2000’s that I made for Bill Cutler.It features 18 pieces with four solutions, however finding one will definitely keep you busy for some time!I’ve always wanted to revisit it but in a smaller scale, I used a 3/16” unit size with the overall size being approximately 6” x 4”.The woods used were salvaged from an old upright piano from the 1920’s that I layed out the keys in a wall hanging (see last photo). Slipfeath...
$100.00
0 bids
Canuck 408
Singmaster Packing - David Singmaster (1971) by John Devost
This design by Professor Singmaster (sadly passed away in 2023) was my very first puzzle offering at CubicDissection back in 2005, it’s 25 pieces that can be packed in the box 22 ways.I was going through my ‘Salvaged Piano Wood’ (see last photo of my keyboard wall hanging, that I made from our upright piano that was produced in the ‘roaring ‘20’s!), so I figured I’d make more of this classic puzzle with this antique lumber.As always everything gets my ‘triple buffing finish’ th...
$100.00
0 bids
Canuck 408
Pentablock - Stewart Coffin Design #2 by John Devost
I’ve been wanting to make this design for years and now after decades making puzzles finally made a copy using some of my Salvaged Piano Wood.One of the first puzzles that I purchased from Interlocking Puzzles (Wayne Daniel - RIP) in early 2000 was this familiar 12 Piece Pentomino design. I made a box to contain the 3x4x5 (3940 solutions) and the 2x5x6 (264 solutions) configuration.Everything has my ‘Triple Buff Finish’ and comes with printed solutions sheet.Shipping cost to be determin...
$80.00
0 bids
Canuck 408
Tube It In - William Strijbos by John Devost
It seems hard to believe that it's been almost 20 years since I first made a small run of this clever packing puzzle design in 2006. William has graciously allowed me to offer up another run as there were only a dozen copies made in 2006.The original metal version was William’s exchange puzzle at the IPP21 in Tokyo.This version is made using many wood varieties and includes a Stand. The entire puzzle has been ‘triple buffed’ giving it a very nice sheen.Overall size is a little over 4...
$100.00
0 bids
Kel Snake 61
False Profit - Gift Card Trick Box
The False Profit A Gift Card Trick Box
An exercise in expectation, assumption, and just a little bit of mischief.
For years, a curious lineage of trick gift card boxes has emerged from the workshop. Each one different. Each one relying on the same delightful flaw in human nature: the belief that surely this is more complicated than it really is.
Solvers poke, prod, overthink, and invent elaborate theories—only to discover that the answer was often hiding in plain sight.
The False Profit tu...
$110.00
2 bids
ColinLGParks 61
Lock Box, by Eric Fuller [2020 Edition]
A genius creation from a master craftsman and devilish designer, the dearly departed Eric Fuller.Tricky and twisty, one of the greatest solving journeys I have had the pleasure of experiencing. Still functions perfectly.This copy's main box is made from a beautiful figured quartersawn sapele, and the key is made from sapele and jatoba. (The key comes in a small black satin bag with a drawstring.)Upon solving the puzzle, you will find a prize, and Eric Fuller's small 'e' signature, as well as the...
$700.00
0 bids
Nonax 61
A Wing, But No Prayer!
Description:Puzzle is not to take anything apart (which is impossible) but to figure out how this was made.It was made 25 years ago by Mike Snyder.Payment : PayPal (F&F preferred or fees to be paid by buyer). Wait until the auction is finished so that I let you know the paypal address to pay to.Please don’t pay directly after you win the auction. Let’s first discuss your preferred delivery requirements and adjust the total amount accordingly.Note: I have disabled the anti-sniping feature. Me...
€100.00
0 bids